Structural Repair After Fire in PLAYA DEL REY, California means rebuilding what the flames and the fire hoses wrecked: charred framing, sagging ceiling joists, melted wiring, and drywall that soaked up soot and water. We handle fire structural restoration PLAYA DEL REY California homeowners call for at 2 a.m., from emergency shoring and board-up through framing, insulation, and final inspection. One crew, one file, one number to call.
Structural Repair After Fire in PLAYA DEL REY, California is the licensed rebuilding phase that starts after the flames are out and the soot is cleaned: replacing charred framing, sistering damaged joists, re-sheathing fire-damaged roofing, swapping melted wiring, and restoring drywall, insulation, and plywood to code. It is not cosmetic patching. A 20-minute flashover in a Playa del Rey kitchen can char a header beam and cook the plywood behind it, and the wall looks fine from the living room until you put a moisture meter on it.
Local calls come from three places: kitchen and electrical fires in the older bungalows off Pacific Avenue and Napoleon Street, attic fires in the tract homes near Loyola Village, and smoke-damaged HVAC systems in the condos around Marina Peninsula. Salt air off Dockweiler speeds corrosion on any exposed metal, so we treat every fire-damaged fastener and flashing as suspect until it is tested. If you are searching for structural fire repair near me PLAYA DEL REY California after a loss, the rebuild starts with documentation, not drywall.
The rebuild covers the building shell and the systems inside it that the fire or the firefighting water damaged. Contents, furniture, and personal belongings are handled as a separate part of the claim, and we will flag anything that needs a specialist so nothing gets missed.
Openings are boarded, the roof is tarped, and any sagging ceiling or floor is shored the same day, usually within 2 to 4 hours of your call, so the structure is protected while the scope is written.
Studs, headers, joists, and rafters that are charred or compromised come out and new lumber goes in, sistered where the damage is partial and replaced where it is not. Every bay is photographed before it closes.
Fire-damaged roofing and plywood sheathing are replaced and flashed, which matters in Playa del Rey where salt air finds any open seam and starts corrosion within weeks.
Smoke-soaked drywall and insulation are removed and replaced, then taped, textured, and primed so the repaired room matches the rest of the house instead of reading as a patch.
Melted wiring is replaced by a licensed electrician, and every penetration is closed with fire-rated caulk and smoke sealant so the wall performs the way the code intends.
Hydroxyl generators and air scrubbers run until the moisture meter and the odor check both pass. We do not close a wall on a wet reading or a smell that is still there.
We arrive, shore any sagging ceiling or floor, tarp the roof, and board the openings. Thermal imaging cameras map the hot spots and moisture meters find the water the hoses left behind. This first visit usually takes 2 to 4 hours and happens the same day you call.
We open the walls with drywall saws and pry bars, photograph every stud bay, and write the scope the adjuster will price. You get a line-item breakdown, and we submit it to your carrier. This is where insurance claim delays are prevented, not fixed later.
Air scrubbers, negative air machines, and HEPA vacuums pull soot and moisture out of the structure. Hydroxyl generators run 24 to 72 hours in the closed house. We do not hang drywall until the moisture meter reads dry on the same day twice.
Charred framing comes out, new lumber and plywood go in, and fire-rated caulk and smoke sealant close every penetration. Melted wiring is replaced by a licensed electrician. Roofing, insulation, and drywall follow in sequence, with the inspection scheduled at each stage.
We walk the job with you, room by room, and hand over the permit card, the inspection sign-offs, and the material receipts. Any callback in the first year is on us. Most customers say this walk is the first time the house feels like theirs again.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Find hot spots and hidden char behind intact surfaces before demolition, so the scope covers the whole loss instead of the visible part.
Read the framing and subfloor after firefighting water, and confirm the structure is dry before any new material goes back.
Pull soot and moisture out of the air and keep the rest of the house from being contaminated during demolition.
Run 24 to 72 hours in the closed house to break down smoke odor in the cavities and ductwork before the rebuild closes them.
Remove fine soot from surfaces and cavities without spreading it, which protects the new materials and the crew.
Open the walls cleanly for inspection and documentation, so the adjuster sees the framing and not just a hole.
Drying equipment we run on the water-damaged portion of every fire job, matched to the size of the wet area.
A stovetop fire in a 1950s bungalow off Napoleon Street charred the header above the stove, melted the cabinet run, and left soot on every surface in the kitchen and the adjoining dining room. The wall looked intact from the living room.
The charred header and cabinets were removed and replaced, the wiring behind the stove was replaced and inspected, and the drywall and insulation were rebuilt. The kitchen was back in service in 5 weeks with a signed inspection card.
An attic fire near Loyola Village burned through the roof deck and charred the top plates and two rafters. The homeowner noticed smoke in a bedroom closet before anyone saw flame.
We tarped the roof the same day, replaced the sheathing and the two damaged rafters, re-insulated to code, and re-flashed every penetration. The final inspection passed on the first visit and the roof held through the next rain.
A small condo fire on the Marina Peninsula was put out fast, but the hoses pushed several hundred gallons into the shared wall. The drywall looked fine and the neighbor's unit was starting to smell musty.
We metered the shared wall, opened it, dried the framing with air movers and a negative air machine, and rebuilt only the damaged side once the readings were dry. The neighbor never moved out and no mold was found at the 30-day check.
The fire is the visible loss. The expensive part is usually what it left behind: water in the framing, smoke in the ducts, and a claim that stalls because nobody documented the damage properly.
Ask a pro →We run hydroxyl generators and thermal fogging solution into the cavities before drywall goes back, and our IICRC Odor Control Technician (OCT) signs off on clearance so the finished room does not smell like the fire.
We meter every wall with moisture meters, run air scrubbers and negative air machines, and refuse to close a wall until the same reading comes back dry on two separate days.
We photograph each stud bay, itemize materials by quantity, and submit the scope in the format the carrier expects, which is how the rebuild starts while the claim is still being finalized.
We open the affected runs, replace the conductors, reseal with fire-rated caulk, and get the electrical inspection signed off before the drywall closes.
Most Playa del Rey structural fire repairs run $8,000 to $45,000 in 2026, with a single-room framing and drywall rebuild near the low end and a full roof-plus-framing job near the high end. Insurance usually covers the covered portion after your deductible. The number moves with how many stud bays are charred, whether the roof deck is involved, and whether the firefighting water reached the subfloor.
We do, and we are local to Playa del Rey, not dispatched from a county away. Our crews hold IICRC FSRT certification and work under a California State Contractor License (B-1 General Building). We handle framing, roofing, drywall, insulation, and finish in-house, and we bill your carrier directly so you are not fronting the rebuild cost out of pocket.
Yes. Any structural work, framing replacement, reroofing, or electrical repair after a fire requires a permit in Playa del Rey, and the inspections are not optional. We pull the permit, meet the inspector at each stage, and give you the signed card at the final walk. Unpermitted fire repairs surface at resale and can void coverage, so this is not a corner worth cutting.
A single-room rebuild typically takes 3 to 5 weeks; a whole-floor or roof-involved job runs 8 to 12 weeks. The permit timeline is usually the long pole, not the carpentry. We start emergency stabilization the same day, so the structure is protected while the paperwork clears, and we give you a written schedule with the phases marked.
Smoke Damage RestorationSmoke travels farther than flame, and in Playa del Rey it settles into closets and HVAC returns two rooms away. We clean and seal those surfaces before the structural rebuild closes the walls, so the smell does not come back after the paint dries.Explore →
Fire Damage Clean UpCleanup comes before rebuild. Soot residue on walls, char debris, and wet insulation all get removed and hauled off, which keeps the framing crew from working around contaminated material and keeps your dumpster count honest.Explore →
Emergency Fire Damage RestorationThe first 24 hours decide how much of the structure survives. Our emergency crew shores, tarps, and boards the Playa del Rey property the same day, which is what stops rain and salt air from turning a fire loss into a mold and rot loss.Explore →
Odor Removal After FireOdor is a structural problem, not a candle problem. We use hydroxyl generators, ozone where the house is empty, and thermal fogging solution in the cavities before drywall goes back, so the finished rebuild does not smell like the fire that caused it.Explore →
Soot RemovalSoot is acidic and etches metal and finished surfaces within days. We HEPA-vacuum and chemically sponge every affected surface before framing work begins, which protects the new materials and gives the adjuster a clean before-and-after record.Explore →
Smoke RemediationSmoke remediation covers the ductwork, attic, and wall cavities the fire never touched but the smoke did. We fog and scrub those spaces so the structural repair after fire in Playa del Rey does not seal smoke odor inside a brand-new wall.Explore →
Fire and Flood RestorationFirefighting leaves 300 to 800 gallons in a typical house. We dry the framing and subfloor with air movers and moisture meters before rebuild, so the new drywall is not installed over wet lumber that will grow mold in a month.Explore →
24 hour Fire RestorationOur line is answered around the clock. A 2 a.m. call from Playa del Rey gets a crew dispatched, not a callback in the morning, and the board-up happens while the structure is still worth saving.Explore →One call gets a crew to your door, a board-up on the openings, and a written scope your adjuster can price. We are licensed, insured, and we answer at 2 a.m. Call (833) 929-6186 and we will be there.
Call Now (833) 929-6186 →Our line is answered 24 hours a day, including holidays. Call (833) 929-6186 and a technician will ask a few questions about the fire, the structure, and whether anyone is still inside, then dispatch a crew. Most PLAYA DEL REY calls get a team on site within the hour.